Vol. 22 Núm. 1 (2009): Revista ION
Artículos

FIBRA DE PALMA AFRICANA (Elaeis guineensis) PARA MEJORAR LAS PROPIEDADES MECÁNICAS DEL CARTÓN RECICLADO

Javier David Angarita Martínez
Universidad Industrial de Santander. Bucaramanga, Colombia
Biografía
Diana Isabel Díaz Durán
Universidad Industrial de Santander. Bucaramanga, Colombia
Biografía
Luz Amparo Lozano U.
Universidad Industrial de Santander. Bucaramanga, Colombia
Biografía

Cómo citar

Angarita Martínez, J. D., Díaz Durán, D. I., & Lozano U., L. A. (2009). FIBRA DE PALMA AFRICANA (Elaeis guineensis) PARA MEJORAR LAS PROPIEDADES MECÁNICAS DEL CARTÓN RECICLADO. Revista ION, 22(1). Recuperado a partir de https://revistas.uis.edu.co/index.php/revistaion/article/view/202

Resumen

RESUMEN

Las fibras recicladas producen papeles con pobres propiedades mecánicas debido a la pérdida irreversible de la capacidad de hinchamiento con los niveles y duración del secado, i.e. hornification. Existen varios métodos para restaurar las uniones interfibrilares de la fibra reciclada entre los cuales se encuentra las mezclas con fibra virgen. El objetivo de este estudio fue evaluar el efecto de la adición de pulpa de raquis de la hoja de palma africana (RHPA) sobre las propiedades mecánicas de cartón comercial colombiano. En el laboratorio fueron evaluadas hojas estándar de prueba siguiendo los métodos estándar TAPPI con adiciones de 15%, 25%, 35% y 50% de pulpa RHPA. Las propiedades de resistencia de los papeles obtenidos fueron proyectadas usando correlaciones para estimar el comportamiento como cartón corrugado. Las más importantes propiedades de resistencia mecánica de cartones RCT, CMT y CFC fueron incrementadas a partir del porcentaje de adición más bajo de pulpa RHPA (15%). El SCT estimado a partir de correlaciones mostró incrementos hasta del 54% para el cartón evaluado respecto a los materiales originales. La pulpa RHPA puede ser mezclada con cartón comercial reciclado para mejorar sus propiedades mecánicas.

Palabras claves: Cartón Reciclado; Mezclas; Fibra Virgen; Fibra de Raquis de Hoja de Palma de Aceite; Restauración; Propiedades Mecánicas; Correlaciones; Cajas Corrugadas.

ABSTRACT

Recycled fibers produce paper with poor mechanical properties due to the irreversible lost of the swelling capacity with the level and duration of drying, i.e., hornification. The blending with virgin fiber is one of the methods to recover the interfiber bonding of the recycled pulp. The aim of this study was to evaluate the effect of blending African oil-palm frond-rachis soda pulp (RHPA) on the mechanical properties of Colombian commercial paperboard. At the laboratory standard handsheets were evaluated following the TAPPI standard methods at ratios of 15%, 25%, 35% and 50% of RHPA pulp. Strength properties of papers obtained were projected using relationship to estimate its behavior as corrugated board. The most important mechanical properties of paperboard RCT, CMT and CFC were increased since the lowest addition percentage of RHPA pulp (15%). SCT estimated by relationship showed increases of up to 54% for the evaluated paperboard in relation to the original material. RHPA pulp can be blended with commercial paperboard to improve its mechanical properties.

Keywords: Recycled Paperboard; Blending; Virgin Fiber; Oil-Palm frond Rachis Fiber; Upgrading; Mechanical Properties; Relationship; Corrugated Box.

Descargas

Los datos de descargas todavía no están disponibles.