Vol. 15 No. 2 (2016): Revista UIS Ingenierías
Articles

Methodology for Registration of Power Quality Parameters in Smart Microgrids

Luis Eduardo Perdomo Orjuela
Universidad Distrital Francisco José de Caldas
Andrés Alfonso Rodríguez
Universidad Distrital Francisco José de Caldas
Francisco Santamaría
Universidad Distrital Francisco José de Caldas
Portada RUI 15.2

Published 2016-06-16

Keywords

  • microgrid,
  • internet of thinks,
  • electromagnetic compatibility,
  • printed circuit board,
  • power quality

How to Cite

Perdomo Orjuela, L. E., Alfonso Rodríguez, A., & Santamaría, F. (2016). Methodology for Registration of Power Quality Parameters in Smart Microgrids. Revista UIS Ingenierías, 15(2), 117–123. https://doi.org/10.18273/revuin.v15n2-2016010

Abstract

Registration of power quality parameters on smart microgrids is a need, therefore, it is necessary to have devices that allow the acquisition, processing, and analysis of these parameters.This article presents a methodology for the acquisition and processing of information, involving telecommunications strategies and electromagnetic compatibility criteria for designing printed circuit boards. This methodology allows to get a device with high-reliability and low cost, in terms of production and operation. In addition, by having multiple recorders connected to a network of lessthan1 kV it is possible to infer some characteristics about the origin of the registered disturbances

Downloads

Download data is not yet available.

References

  1. C. Trujillo, F. Santamaria, J. Hernández, A. Jaramillo, E. Gaona, E. Rivas, O. Flórez, D. Rodríguez, J. Alarcón, and H. Rojas, Microrredes eléctricas, Primera. Bogotá: Universidad Distrital Francisco José de Caldas, 2016.
  2. H. Minxiao, S. Xiaoling, L. Shaobo, and Z. Zhengkui, “Transient analysis and control for microgrid stability controller,” in 2013 IEEE Grenoble Conference, 2013, pp. 1–6.
  3. H.-L. Hsiang-Lin Huang, Y.-D. Yih-Der Lee, and Y.-R. Yung-Ruei Chang, “Improvement of transient response to islanding control of microgrid with bidirectional inverter,” in 2015 International Conference on Renewable Energy Research and Applications (ICRERA), 2015, pp. 184–188.
  4. W. Wei Deng, W. Wei Pei, and Z. Zhiping Qi, “Impact and improvement of Distributed Generation on voltage quality in Micro-grid,” in 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, 2008, pp. 1737–1741.
  5. M. Begovic, Ed., Electrical Transmission Systems and Smart Grids: Selected Entries from the Encyclopedia of Sustainability Science and Technology. New York: Springer Science & Business Media, 2012.
  6. F. Bouhafs, M. Mackay, and M. Merabti, Communication Challenges and Solutions in the Smart Grid. New York: Springer, 2014.
  7. Z. M. Fadlullah and N. Kato, Evolution of Smart Grids, vol. 13. New York: Springer Science & Business Media, 2015.
  8. B. M. Buchholz and Z. Styczynski, Smart Grids – Fundamentals and Technologies in Electricity Networks. New York: Springer Science & Business Media, 2014.
  9. T. Jiang, L. Yu, and Y. Cao, Energy Management of Internet Data Centers in Smart Grid. New York: Springer, 2015.
  10. K. C. Budka, J. G. Deshpande, and M. Thottan, Communication Networks for Smart Grids: Making Smart Grid Real. New York: Springer Science & Business Media, 2014.
  11. A. Keyhani and M. Marwali, Eds., Smart Power Grids 2011. New York: Springer Science & Business Media, 2012.
  12. CIGRE WG 37.28, Quality of Supply Customers Requirements, no. June. Folsom: International Council on Large Electric Systems, 2001.
  13. CIGRE WG C4.07, Power Quality Indices and Objectives, no. January. Folsom: International Council on Large Electric Systems, 2005.
  14. CIGRE JWG C4.107, Economic Framework for Voltage Quality, no. June. Folsom: International Council on Large Electric Systems, 2011.
  15. M. Hamzeh, H. Karimi, and H. Mokhtari, “Harmonic and Negative-Sequence Current Control in an Islanded Multi-Bus MV Microgrid,” IEEE Trans. Smart Grid, vol. 5, no. 1, pp. 167–176, Jan. 2014.
  16. G. W. Chang, H. J. Su, L. Y. Hsu, H. J. Lu, Y. R. Chang, Y. D. Lee, and C. C. Wu, “A study of passive harmonic filter planning for an AC microgrid,” in 2015 IEEE Power & Energy Society General Meeting, 2015, pp. 1–4.
  17. CIGRE WG C4.301, Use of Surge Arresters for Lightning Protection of Transmission Lines, no. 253. Folsom: International Council on Large Electric Systems, 2010.
  18. CIGRE WG01 SC33, Guide to procedures for estimating the lightning performance of transmission lines, vol. 01, no. October. Folsom: International Council on Large Electric Systems, 1991.
  19. CIGRE TF 33.01.03, Lightning Exposure of Structures and Interception Efficiency of Air Terminals, no. October. Folsom: International Council on Large Electric Systems, 1997.
  20. CIGRE WG 33.01.02, Characterization of Lightning for Applications in Electric Power Systems, no. December. Folsom: International Council on Large Electric Systems, 2000.
  21. CIGRE WG C4.4.02, Protection of MV and LV networks against lightning. Part I: Common Topics, no. 438 pt 1/2. Folsom: International Council on Large Electric Systems, 1997.
  22. CIGRE WG C4.404, Cloud to gound lightning parameters derived from lightning location systems, no. April. Folsom: International Council on Large Electric Systems, 2009.
  23. CIGRE WG C.4.402, Protection of Medium Voltage and Low Voltage Networks Against Lightning Part 2: Lightning protection of Medium Voltage Networks, no. December. Folsom: International Council on Large Electric Systems, 2010.
  24. CIGRE WG C4.408, Lightning Protection of Low Voltages Networks, no. August. Folsom: International Council on Large Electric Systems, 2013.
  25. CIGRE TF 33.01.02, Lightning Characteristics Relevant for Electrical Engineering: Assement of Sensing, Recording and Mapping Requirements in the Light of Present Technological Advancements. Folsom: International Council on Large Electric Systems, 1995.
  26. Z. Zhili Lei, X. Xin Ai, and M. Mingyong Cui, “Coordinated control strategy based on network parameters for voltage sags compensating in Microgrid,” in 2010 5th International Conference on Critical Infrastructure (CRIS), 2010, pp. 1–5.
  27. IEC, IEC 61000-4-30 Electromagnetic compatibility (EMC) – Part 4-30: Testing and measurement techniques – Power quality measurement methods. Geneva: International Electrotechnical Commission, 2000.
  28. IEEE Power Engineering Society, IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems, IEEE Std 519 - 1992, vol. 1992, no. June. New York: Institute of Electrical and Electronics Engineers, 1992.
  29. R. Transit, V. Interface, S. Committee, I. Vehicular, and T. Society, IEEE Recommended practice on Surge Voltages in Low-Voltage AC Power Circuits, IEEE C62.41.2-1991, vol. 2004, no. February. New York, 2005.
  30. A. Alfonso, L. Perdomo, F. Santamaria, and G. Carlos, “Transient surges analysis in low voltage networks,” Rev. Tecnura, vol. 18, no. Edición especial doctorado, pp. 41–50, 2014.
  31. IEEE Power & Energy Society, IEEE Std 1159 - IEEE Recommended Practice for Monitoring Electric Power Quality., vol. 2009, no. June. New York: Institute of Electrical and Electronics Engineers, 2009.
  32. J. Balcells, F. Daura, R. Esparza, and R. Pallás, Interferencias electromagnéticas en sistemas electrónicos. Ciudad de México: Alfaomega S.A, 1992.
  33. C. Bowick, RF Circuit Design. Indianapolis: Newnes, 1982.
  34. S. Celozzi, R. Araneo, and G. Lovat, Electromagnetic shielding. New Jersey: John Wiley & Sons, 2008.
  35. M. Davidovitz, “Calculation of multiconductor microstrip line capacitances using the semidiscrete finite element method,” IEEE Microw. Guid. Wave Lett., vol. 1, no. 1, pp. 5–7, Jan. 1991.
  36. DelingerEdgar, “A Frequency Dependent Solution for Microstrip Transmission Lines,” IEEE Trans. Microw. Theory Tech., vol. 19, pp. 30–39, 1971.
  37. E. J. Denlinger, “A Frequency Dependent Solution for Microstrip Transmission Lines,” IEEE Trans. Microw. Theory Tech., vol. 19, no. 1, pp. 30–39, Jan. 1971.
  38. K.-H. Gonschorek and R. Vick, Electromagnetic Compatibility for Device Design and System Integration. Heidelberg: Springer Science & Business Media, 2009.
  39. T. Laurila, V. Vuorinen, M. Paulasto-Kröckel, M. Turunen, T. T. Mattila, and J. Kivilahti, Interfacial Compatibility in Microelectronics: Moving Away from the Trial and Error Approach. London: Springer Science & Business Media, 2012.
  40. R. Ludwig and G. Bogdanov, RF Circuit Design: Theory and Applications, London. New York: Prentice Hall, 2009.
  41. R. Mittra and T. Itoh, “A New Technique for the Analysis of the Dispersion Characteristics of Microstrip Lines,” IEEE Trans. Microw. Theory Tech., vol. 19, no. 1, pp. 47–56, Jan. 1971.
  42. M. I. Montrose, EMC and the Printed Circuit Board: Design, Theory, and Layout Made Simple. New York: John Wiley & Sons, 2004.
  43. M. I. Montrose, Printed Circuit Board Design Techniques for EMC Compliance: A Handbook for Designers, Second edi. New York: John Wiley & Sons, 2000.
  44. D. Morgan, A Handbook for EMC Testing and Measurement. London: The Institution of Engineering and Technology, 1994.
  45. A. M. Niknejad, Electromagnetics for High-Speed Analog and Digital Communication Circuits. Cambridge: Cambridge University Press, 2007.
  46. M. O’Hara, EMC at Component and PCB Level. Oxford: Newnes, 1998.
  47. H. W. Ott, Electromagnetic Compatibility Engineering. New Jersey: John Wiley & Sons, 2011.
  48. J.-M. Redouté and M. Steyaert, EMC of Analog Integrated Circuits. Dordrecht: Springer Science & Business Media, 2009.
  49. H. E. Stinehelfer, “An Accurate Calculation of Uniform Microstrip Transmission Lines,” IEEE J. Solid-State Circuits, vol. 3, no. 2, pp. 101–106, Jun. 1968.
  50. V. Teppati, A. Ferrero, and M. Sayed, Eds., Modern RF and Microwave Measurement Techniques. Cambridge: Cambridge University Press, 2013.