Vol. 17 No. 2 (2018): Revista UIS Ingenierías
Articles

Methodology for rotors balancing using a vibration analyzer

Heller Sánchez-Acevedo
UNIVERSIDAD INDUSTRIAL DE SANTANDER
Fabian Nova
UNIVERSIDAD INDUSTRIAL DE SANTANDER
Jhon Madrigal
UNIVERSIDAD INDUSTRIAL DE SANTANDER

Published 2018-06-01

Keywords

  • mechanical vibration,
  • rotors,
  • unbalance

How to Cite

Sánchez-Acevedo, H., Nova, F., & Madrigal, J. (2018). Methodology for rotors balancing using a vibration analyzer. Revista UIS Ingenierías, 17(2), 291–308. https://doi.org/10.18273/revuin.v17n2-2018025

Abstract

The present work focuses on the proposal of a methodology for rotors balancing. To achieve the objective, the vibration analyzer, reference OROS 35 and its applications, are used. The different types of unbalances are reviewed and evaluated at work. The methodology is implemented and executed experimentally in different vibration test benches, with different settings. In the same way, the methodology was used with an industrial machine. The results obtained were positive. These results were then compared with the current regulation.

Downloads

Download data is not yet available.

References

E. Estupiñán P., C. San Martín, and L. Canales M., “Desarrollo de un instrumento virtual para el balanceamiento dinámico de rotores,” Ingeniare Rev. Chil. Ing., vol. 14, no. 2, pp. 146–152, 2006.

H. G. Sánchez A., “Modelo analítico para el estudio de la torsión en rotores flexibles,” Rev. UIS Ing,. vol. 9, no. 1, 2010.

[H. G. Sánchez Acevedo, J. Uscátegui, and S. Gómez, “Metodología para la detección de fallas en una estructura entramada metálica empleando las técnicas de análisis modal y PSO,” Rev. UIS Ing., vol. 16, no. 2, pp.43-50, 2017. DOI: https://doi.org/10.18273/revuin.v16n2-2017004

J. M. Pachón, O. A. González, and H. G. Sánchez, “Detección de daños en una armadura unidimensional por medio del algoritmo de optimización de la luciérnaga y elementos finitos,” Av. Investig. en Ing., vol. 13, no. 1, pp. 1–7, 2017.

H. G. Sanchez, D. M. C. Marulanda, and E. G. Florez, “Application of Vibration Based Damage Identification Techniques on Metallic Structures,” Adv. Mater. Res., vol. 875–877, pp. 875–879, 2014.

M. Hutterer, G. Kalteis, and M. Schrödl, “Redundant unbalance compensation of an active magnetic bearing system,” Mech. Syst. Signal Process., vol. 94, pp. 267–278, 2017.

R. Ambur and S. Rinderknecht, “Unbalance detection in rotor systems with active bearings using self-sensing piezoelectric actuators,” Mech. Syst. Signal Process., vol. 102, pp. 72–86, 2018.

[R. Ta, D. O. Bukowitz-kulka, and J. C. Ustiola-borjas, “Equilibrado dinámico,” vol. 84, pp. 415–421, 2009.

S. V Amiouny, J. J. Bartholdi III, and J. H. Vande Vate, “Heuristics for Balancing Turbine Fans,” Oper. Res., vol. 48, no. 4, pp. 591–602, 2000.

M. Jung and S. Jung, “Neural Network Control for the Balancing Performance of a Single-Wheel Transportation Vehicle: Gyrocycle,” Adv. Intell. Syst. Comput., vol. 274, pp. 877–885, 2014.

S. Zhou and J. Shi, “Active balancing and vibration control of rotating machinery: A survey,” Shock Vib. Dig., vol. 33, no. 5, pp. 361–371, 2001.

W. C. Foiles, P. E. Allaire, and E. J. Gunter, “Review: Rotor balancing,” Shock Vib., vol. 5, no. 5–6, pp. 325–336, 1998.

S. Liu, “A modified low-speed balancing method for flexible rotors based on holospectrum,” Mech. Syst. Signal Process., vol. 21, no. 1, pp. 348–364, 2007.

A. Mohammadzadeh and A. Ghoddoosian, “Balancing of flexible rotors with optimization methods,” Int. Rev. Mech. Eng., vol. 4, no. 7, pp. 917–923, 2010.

L. Alberto et al., “An improvement of a single-plane balancing method via residual current of a rotor directly coupled to an induction motor,” Nov. Sci., vol. 8, no. 16, pp. 59–76, 2016.

P. Diouf and W. Herbert, “Understanding rotor balance for electric motors,” IEEE Conf. Rec. Annu. Pulp Pap. Ind. Tech. Conf., pp. 7–17, 2014.

Q. Wang and F. Wang, “A new vibration mechanism of balancing machine for satellite-borne spinning rotors,” Chinese J. Aeronaut., vol. 27, no. 5, pp. 1318–1326, 2014.

A. G. Kol’tsov and D. S. Rechenko, “Dynamic rotary balancing in metal-cutting machines,” Russ. Eng. Res., vol. 32, no. 2, pp. 179–181, 2012.

Š. Olejárová and T. Krenický, “Measuring the Size of Vibrations on a Mill Using the Vibration Analysis,” Key Eng. Mater., vol. 756, pp. 119–126, 2017.

M. M. Tahir, A. Hussain, S. Badshah, A. Q. Khan, and N. Iqbal, “Classification of unbalance and misalignment faults in rotor using multi-axis time domain features,” ICET 2016 - 2016 Int. Conf. Emerg. Technol., 2017.