Revista UIS Ingenierías

Vol. 11 Núm. 2 (2012): Revista UIS Ingenierías
Artículos

Intercambiadores de calor de tubo en espiral

PDF HTML
  • Juan Gonzalo Ardila-Marín
Juan Gonzalo Ardila-Marín
Instituto Tecnológico Metropolitano
Biografía

Publicado 2012-12-15

Palabras clave

  • Intercambiadores de calo,
  • tubos en espiral plana,
  • tubos en espiral helicoidal,
  • correlaciones de transferencia de calor,
  • correlaciones de caída de presión

Cómo citar

Ardila-Marín, J. G. (2012). Intercambiadores de calor de tubo en espiral. Revista UIS Ingenierías, 11(2), 203–213. Recuperado a partir de https://revistas.uis.edu.co/index.php/revistauisingenierias/article/view/203-213
Aviso de derechos de autor/a

Resumen

El uso de tubos en espiral en intercambiadores de calor ha crecido, lo que ha hecho crecer el interés de la academia en el estudio de estos dispositivos, encontrándose que el mejoramiento en la tasa de transferencia obedece a la formación de fujos secundarios al interior de los tubos. Por tal razón, se han planteado una serie de correlaciones de transferencia de calor, desarrolladas numérica o experimentalmente, que permiten predecir la convección en los tubos en espiral y dimensionar los intercambiadores, y que son actualmente una herramienta fundamental de diseño.

Este artículo presenta las principales correlaciones que se aplican a tal fn. Aunque se experimenta mejora térmica en los intercambiadores de calor, se evidencia difcultad en el fujo, e incremento en la caída de presión, por lo que se han desarrollado y se presentan en este artículo, una serie de correlaciones para el factor de fricción. Al fnal se justifca la selección de esta tecnología y se presentan las nuevas tendencias.

PDF HTML

Descargas

Los datos de descargas todavía no están disponibles.

Referencias

  1. A. Zachár, “Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall,” International Journal of Heat and Mass Transfer, vol. 53, June 2010, pp. 3928- 3939.
  2. H. Shokouhmand, M.R Salimpourand M.A Akhavan-Behabadi, “Experimental investigation of shell and coiled tube heat exchangers using Wilson plots,” International Communications in Heat and Mass Transfer, vol. 35, August 2007, pp. 84-92.
  3. P. Minton, “Designing spiral tube heat exchangers,” Chemical engineering, vol. 77, No. 11, 1970, pp. 145-152.
  4. N. Ghorbani, H. Taherian, M. Gorjiand H. Mirgolbabaei, “Experimental study of mixed convection heat transfer in vertical helically coiled tube heat exchangers,” Experimental Thermal and Fluid Science, vol. 34, February 2010, pp. 900-905.
  5. A. Awwad, R. C. Xin, Z. F. Dong, M. A. Ebadian and H. M. Soliman, “Measurement and correlation of the pressure drop in air-water two-phase flow in horizontal helicoidal pipes,” International Journal Multiphase Flow, vol. 21, No. 4, January 1995, 607-619.
  6. R. C. Xin, A. Awwad, Z. F. Dongand M. A. Ebadian, “An experimental study of single-phase and two-phase flow pressure drop in annular helicoidal pipes,” International Journal Heat and Fluid Flow, vol. 18, March 1997, pp. 482-488.
  7. R. C. Xin, A. Awwad, Z. F. Dong and M. A. Ebadian, “An investigation and comparative study of the pressure drop in air-water two-phase flow in vertical helicoidal pipes,” International Journal Heat and Mass Transfer, vol. 39, No. 4, April 1995, pp. 735-743.
  8. Vimal Kumar, SupreetSaini, Manish Sharma and K.D.P. Nigam, “Pressure drop and heat transfer study in tube-in-tube helical heat exchanger,” Chemical Engineering Science, vol. 61, April 2006, pp. 4403-4416.
  9. Timothy J. Rennie and Vijaya G.S. Raghavan, “Effect of fluid thermal properties on the heat transfer characteristics in a double-pipe helical heat exchanger,” International Journal of Thermal Sciences, vol. 45, March 2006, pp. 1158-1165.
  10. Timothy J. Rennie and Vijaya G.S. Raghavan, “Numerical analysis of the lethality and processing uniformity in a double-pipe helical heat exchanger,” Chemical Engineering and Processing, vol. 49, June 2010, pp. 672-679.
  11. Timothy J. Rennie and Vijaya G.S. Raghavan, “Numerical studies of a double-pipe helical heat exchanger,” Applied Thermal Engineering, vol. 26, December 2005, pp. 1266-1273.
  12. Timothy J. Rennieand Vijaya G.S. Raghavan, “Thermally dependent viscosity and nonNewtonian flow in a double-pipe helical heat exchanger,” Applied Thermal Engineering, vol. 27, November 2006, pp. 862-868.
  13. Gabriela Huminic and Angel Huminic, “Heat transfer characteristics in double tube helical heat exchangers using nano fluids,” International Journal of Heat and Mass Transfer, vol. 54, June 2011, pp. 4280-4287.
  14. M. Mehrabi, S. M. Pesteei and T. Pashaee G., “Modeling of heat transfer and fluid flow characteristics of helicoidal double-pipe heat exchangers using Adaptive Neuro-Fuzzy Inference System (ANFIS),” International Communications in Heat and Mass Transfer, vol. 38, January2011, pp. 525-532.
  15. J.S. Jayakumar, S. M. Mahajani, J.C. Mandal, Kannan N. Iyer and P. K. Vijayan, “Thermal hydraulic characteristics of air–water two-phase flows in helical pipes,” chemical engineering research and design, vol. 88, September 2009, pp. 501-512.
  16. J.S. Jayakumar, S. M. Mahajani, J.C. Mandal, Kannan N. Iyer and P. K. Vijayan, “CFD analysis of single-phase flows inside helically coiled tubes,” Computers and Chemical Engineering, vol. 34, November 2010, pp. 430-446.
  17. J.S. Jayakumar, S. M. Mahajani, J.C. Mandal, P. K. Vijayan and Rohidas Bhoi, “Experimental and CFD estimation of heat transfer in helically coiled heat exchangers,” chemical engineering research and design, vol. 86,October 2007, pp. 221-232.
  18. Rahul Kharat, Nitin Bhardwaj and R.S. Jha, “Development of heat transfer coefficient correlation for concentric helical coil heat exchanger,” International Journal of Thermal Sciences, vol. 48, May 2009, pp. 2300-2308.
  19. Zhenxing Zhao, Xiangyu Wang, DefuChe and Zidong Cao, “Numerical studies on flow and heat transfer in membrane helical-coil heat exchanger and membrane serpentine-tube heat exchanger,” International Communications in Heat and Mass Transfer, article in press, 2011.
  20. I. Conte and X. F. Peng, “Numerical and experimental investigations of heat transfer performance of rectangular coil heat exchangers,” Applied Thermal Engineering, vol. 29, August 2008, pp. 1799-1808.
  21. I. Conte and X. F. Peng, “Numerical investigations of laminar flow in coiled pipes,” Applied Thermal Engineering, vol. 28, June 2007, pp. 423-432.
  22. Subhashini Vashisth and K.D.P. Nigam, “Prediction of flow profiles and interfacial phenomena for two-phase flow in coiled tubes,” Chemical Engineering and Processing: Process Intensification, vol. 48, June 2008, pp. 452-463.
  23. Ivan Di Piazza and Michele Ciofalo, “Numerical prediction of turbulent flow and heat transfer in helically coiled pipes,” International Journal of Thermal Sciences, vol. 49, October 2009, pp. 653-663.
  24. Paisarn Naphon and Somchai Wongwises, “An experimental study on the in-tube convective heat transfer coefficients in a spiral coil heat exchanger,” International Communications of Heat and Mass Transfer, vol. 29, No. 6, 2002, pp. 797-809.
  25. James R. Couper, W. Roy Penney, James R. Fair and Stanley M. Walas, Chemical Process Equipment, second edition. Fayetteville: ELSEVIER, 2005, p.182.
  26. R. Mote, S. D. Probert and D. Nevrala, “The Performance of a Coiled Finned-Tube HeatExchanger Submerged in a Hot-Water Store: The Effect of the Exchanger’s Orientation,” Applied Energy, vol. 38, 1991, pp. 1-19.
  27. M.R. Salimpour, “Heat transfer characteristics of a temperature-dependent-property fluid in shell and coiled tube heat exchangers,” International Communications in Heat and Mass Transfer, vol. 35, August 2008, pp. 1190-1195.
  28. D. M. Tanton, Some Aspects of the Use of WaterFilled Heat Stores in Gas-Fired Central-Heating Systems [PhD Thesis]. Bedfordshire: Cranfield Institute of Technoloogy - School of Mechanical Engineering, 1986.
  29. Somchai Wongwises and Maitree Polsongkram, “Condensation heat transfer and pressure drop of HFC-134a in a helically coiled concentric tubein-tube heat exchanger,” International Journal of Heat and Mass Transfer, vol. 49, July 2006, pp. 4386-4398.
  30. Somchai Wongwises and Maitree Polsongkram, “Evaporation heat transfer and pressure drop of HFC-134a in a helically coiled concentric tubein-tube heat exchanger,” International Journal of Heat and Mass Transfer, vol. 49, October 2005, pp. 658-670.
  31. Theodore L. Bergman, Frank P. Incropera, David P. DeWitt and Adrienne S. Lavine, Introduction of heat transfer, sixth edition. John Wiley and Sons, 2011, p. 509.
  32. C. E. Kalb and J. D. Seader, “heat and mass transfer phenomena for viscous flow in curved circular tubes,” International Journal of Heat and Mass Transfer, vol. 15, August 1971, pp. 801-817.
  33. S. Srinivasan, S. Nadapurkar and F. A. Holland, “Friction factors for coils,” Transactions of the Institution of Chemical Engineers, vol. 48, 1970, pp. 156-161.
  34. H. Ito, “Friction factors for turbulent flow in curved pipes,” Journal of Basic Engineering, vol. 81, 1959, pp. 123-134.
  35. A. Cioncolini and L. Santini, “An experimental investigation regarding the laminar to turbulent flow transition in helically coiled pipes,” Experimental Thermal and Fluid Science, vol. 30, 2006, pp. 367-380.
  36. Yoshiyuki Inagaki, Hiroshi Koiso, Hideki Takumi, IkuoIoka and Yoshiaki Miyamoto, “Thermal hydraulic study on a high-temperature gas– gas heat exchanger with helically coiled tube bundles,” Nuclear Engineering and Design, vol. 185, May 1998, pp. 141-151.
  37. Narasimha Acharya, Mihir Sen and Hsueh-Chia Chang, “Analysis of heat transfer enhacement in coiled-tube heat exchangers,” International Journal of Heat and Mass Transfer, vol. 44, November 2000, pp. 3189-3199.
  38. Vimal Kumar, Burhanuddin Faizee, Monisha Mridha and K.D.P. Nigam, “Numerical studies of a tube-in-tube helically coiled heat exchanger,” Chemical Engineering and Processing, vol. 47, January 2008, pp. 2287-2295.
  39. M.R. Salimpour, “Heat transfer coefficients of shell and coiled tube heat exchangers,” Experimental Thermal and Fluid Science, vol. 33 July 2008, pp. 203-207.
  40. Ashok K. Satapathy, “Thermodynamic optimization of a coiled tube heat exchanger under constant wall heat flux condition,” Energy, vol. 34 May 2009, pp. 1122-1126.
  41. A. N. Dravid, K. A. Smith, E. W. Merril and P. L. T. Brian, “Effect of secondary fluid motion on laminar flow heat transfer in helically coiled tubes,” A.I.Ch.E Journal, vol. 17, 1971, pp. 1114-1122.
  42. A.N. Dravid, The effect of secondary fluid motion on laminar flow heat transfer in helically coiled tubes [ScD Thesis]. Cambridge, Massachusetts: Massachusetts Institute of Technology, 1969.
  43. C.E. Kalb and J. D. Seader, “Fully developed viscous-flow heat transfer in curved circular tubes with uniform wall temperature,” A.I.Ch.E. Journal, vol. 20, 1974, pp. 340-346.
  44. R.C. Xin and M.A. Ebadian, ”The effects of Prandtl numbers on local and average convective heat transfer characteristic in helical pipes,” Journal Heat transfer, vol. 119, 1997, pp. 467-473.
  45. R. L. Manlapaz and S. W. Churchill, “Fully developed laminar flow in a helically coiled tube of finite pitch,” Chemical Engineering Communications, vol. 7, 1980, pp. 57-78.
  46. Y. Mori and W. Nakayam, “Study on forced convective heat transfer in curved pipes,” International Journal of Heat and Mass Transfer, vol. 10, 1967, pp. 681-695.
  47. C.M. White, “Fluid friction and its relation to heat transfer,” Transactions of Institution of Chemical Engineering, vol. 10, 1929, pp. 66-86.
  48. B. Bai, L. Guo, Z. Feng and X. Chen, “Turbulent heat transfer in a horizontally coiled tube,” Heat Transfer - Asian Research, vol. 28, No. 5, 1999, pp. 395-403.
  49. K. Futagami and Y. Aoyama, “Laminar heat transfer in helically coiled tubes,” International Journal of Heat and Mass Transfer, vol. 31, 1988, pp. 387-396.
  50. L. R. Austin, The development of viscous flow within helical coils [PhD Thesis]. Salt Lake, Utah: University of Utah, 1971.

Artículos similares

También puede {advancedSearchLink} para este artículo.