Articles
Estimation of parameters of a synchronic machine appearing design of the laboratory
Published 2008-12-03
Keywords
- Synchronous Machine,
- Estimation,
- two axis model,
- no-load test,
- model validation
- Predictor Error Method (PEM) ...More
How to Cite
Villamizar-Montes, L., Martínez-Ayala, D. F., & Vargas Torres, H. R. (2008). Estimation of parameters of a synchronic machine appearing design of the laboratory. Revista UIS Ingenierías, 7(2), 193–201. Retrieved from https://revistas.uis.edu.co/index.php/revistauisingenierias/article/view/49
Abstract
This article presents a methodology designed to estimate the parameters of the synchronous machine from measures taken both, in its normal operation as well as in its no-load condition. The methodology uses the PEM method for estimating models in general. This methodology was implemented in MATLAB, and in junction with the software was implemented an acquisition system of electrical signals like voltage and current. The proposed methodology obtains mathematical models of synchronous machine in every level. Finally, it presents the estimation process for a laboratory machine.
Downloads
Download data is not yet available.
References
P. Kundur, Power system control and stability, 1st. edition, Mc. Graw Hil, California, 1994
L. Ljung and T. Södestörm, Theory and practice of recursive identifcation, M.I.T. Press, 1983.
L. Ljung, System identifcation theory for the user, Prentice - hall, 1987.
P. Vas, Parameter estimation, condition monitoring and diagnosis of electrical machines, Oxford, University Press 1993.
W. Scott Meyer and Tsu-huei Liu, Electro-Magnetic Transients Program, Theory Book, Portland Oregon, 1995.
IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power system Stability Analyses, IEEE Standard 1110-2002.
IEEE Test procedures for synchronous machines, IEEE Standard 115-1995.
A. Keyhani and G. Dayal, The effects of noise on frecuency-domain parameter estimation of synchronous machine models, IEEE Trans.4 (1989), 600–607.
A. Keyhani and G. Dayal, Maximum likelihood estimation of solid-rotor synchronous machine parameters form SSFR test data, IEEE Trans. 4 (1989), 551–558.
W. A. Lewis, A basic analysis of synchronous machine part I, AIEE Trans. 77 (1958), 436–456.
M. E. Coultes and W. Watson, Synchronous machine models by standstill frequency response tests, IEEE Trans. PAS-100 (1981), 1480–1489.
P. L. Dandeno, P. Kundur, A. T. Porary, and M. E.Coultes, Adaptation and validation of turbogenerator
model parameters through on-line frecuency response measurements, IEEE Trans. PAS-100 (1981), 1656–1664.
P. L. Dandeno and A. T. Porary, Developed of detailed turbogenerator equivalent circuits from standstill frecuency response measurements, IEEE Trans. PAS-100 (1981), 1646–1643.
P.L. Dandeno, P. Kundur, A. T. Porary, and M.E. Coultes, Validation of turbogenerator stability models by comparisons with power system test, IEEE Trans. PAS-100 (1981), 1637–1643.
F.P. de Mello and L. N. Hannett, Validation of synchronous machine models and determination of model parameters from test, IEEE Trans. PAS-100 (1981), 662–672.
F.P. de Mello and J.R. Ribeiro, Derivation of synchronous machine parameters from test, IEE Trans. PAS-96 (1977), 1211–1218.
G. Shackshaft and A.T. Porary, Implementation of new approach to determination of synchronous machine parameters from test, IEE Proc. 124 (1977), 1170–1178
Zhengming Zhao and Longia Xu, A dinamic on-line parameter identifcation and full-scale experimental verifcation for large synchronous machines, IEEE Trans. 10 (1995), 392–398.
H. B. Karayaka and Keyhani, Metodology Development for Estimation of Armature Circuit and Field Winding Parameters of Large Utility Generators, IEEE Transaction on Energy Conversion, Vol. 14, 1999.
P.M. Anderson and A.A. Fouad, Power System Control & Stability, IEEE Press, 1994.
IEEE Recommended practices and requirements for harmonic control in electrical power systems, IEEE
Standard 519, 1992
L. Ljung and T. Södestörm, Theory and practice of recursive identifcation, M.I.T. Press, 1983.
L. Ljung, System identifcation theory for the user, Prentice - hall, 1987.
P. Vas, Parameter estimation, condition monitoring and diagnosis of electrical machines, Oxford, University Press 1993.
W. Scott Meyer and Tsu-huei Liu, Electro-Magnetic Transients Program, Theory Book, Portland Oregon, 1995.
IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power system Stability Analyses, IEEE Standard 1110-2002.
IEEE Test procedures for synchronous machines, IEEE Standard 115-1995.
A. Keyhani and G. Dayal, The effects of noise on frecuency-domain parameter estimation of synchronous machine models, IEEE Trans.4 (1989), 600–607.
A. Keyhani and G. Dayal, Maximum likelihood estimation of solid-rotor synchronous machine parameters form SSFR test data, IEEE Trans. 4 (1989), 551–558.
W. A. Lewis, A basic analysis of synchronous machine part I, AIEE Trans. 77 (1958), 436–456.
M. E. Coultes and W. Watson, Synchronous machine models by standstill frequency response tests, IEEE Trans. PAS-100 (1981), 1480–1489.
P. L. Dandeno, P. Kundur, A. T. Porary, and M. E.Coultes, Adaptation and validation of turbogenerator
model parameters through on-line frecuency response measurements, IEEE Trans. PAS-100 (1981), 1656–1664.
P. L. Dandeno and A. T. Porary, Developed of detailed turbogenerator equivalent circuits from standstill frecuency response measurements, IEEE Trans. PAS-100 (1981), 1646–1643.
P.L. Dandeno, P. Kundur, A. T. Porary, and M.E. Coultes, Validation of turbogenerator stability models by comparisons with power system test, IEEE Trans. PAS-100 (1981), 1637–1643.
F.P. de Mello and L. N. Hannett, Validation of synchronous machine models and determination of model parameters from test, IEEE Trans. PAS-100 (1981), 662–672.
F.P. de Mello and J.R. Ribeiro, Derivation of synchronous machine parameters from test, IEE Trans. PAS-96 (1977), 1211–1218.
G. Shackshaft and A.T. Porary, Implementation of new approach to determination of synchronous machine parameters from test, IEE Proc. 124 (1977), 1170–1178
Zhengming Zhao and Longia Xu, A dinamic on-line parameter identifcation and full-scale experimental verifcation for large synchronous machines, IEEE Trans. 10 (1995), 392–398.
H. B. Karayaka and Keyhani, Metodology Development for Estimation of Armature Circuit and Field Winding Parameters of Large Utility Generators, IEEE Transaction on Energy Conversion, Vol. 14, 1999.
P.M. Anderson and A.A. Fouad, Power System Control & Stability, IEEE Press, 1994.
IEEE Recommended practices and requirements for harmonic control in electrical power systems, IEEE
Standard 519, 1992