Vol. 19 Núm. 1 (2020): Revista UIS Ingenierías
Artículos

Resistencia a la compresión de cilindros parcialmente rígidos a temperaturas elevadas

Egler Araque
Grupo Intevep, S.A.
Carlos Graciano
Universidad Nacional de Colombia
David Zapata-Medina
Universidad Nacional de Colombia
Octavio Andrés González-Estrada
Universidad Industrial de Santander

Publicado 2020-01-30

Palabras clave

  • resistencia a compresión,
  • acero inoxidable,
  • análisis de elementos finitos,
  • temperatura elevada,
  • rigidización longitudinal

Cómo citar

Araque, E., Graciano, C., Zapata-Medina, D., & González-Estrada, O. A. (2020). Resistencia a la compresión de cilindros parcialmente rígidos a temperaturas elevadas. Revista UIS Ingenierías, 19(1), 131–142. https://doi.org/10.18273/revuin.v19n1-2020013

Resumen

Este trabajo presenta el análisis de elementos finitos de cilindros parcialmente rígidos sometidos a compresión axial a temperaturas elevadas. La resistencia a la compresión se calcula para las condiciones de peso propio y también se investiga la influencia de la temperatura en la respuesta del material. En la industria del petróleo, los recipientes a presión se utilizan comúnmente para operar en condiciones de diseño complejas, como perfiles de alta presión y/o gradientes de temperatura elevados que afectan considerablemente la respuesta estructural de los componentes internos. Entre ellos, los raisers se convierten en elementos de acero sensibles que soportan una carga alta de compresión debido al peso propio, así como, elementos de aislamiento agregados para protegerlos del gradiente de temperatura elevada. La mayoría de los raisers fallan estructuralmente en el extremo inferior debido a la deformación causada por el peso propio y los efectos de temperatura. Para remediar esta situación y garantizar la integridad de la tubería vertical, los refuerzos longitudinales están soldados en el extremo inferior. Por lo tanto, se requiere una evaluación adecuada de la resistencia a la compresión del cilindro, teniendo en cuenta la influencia del refuerzo longitudinal y la temperatura correspondiente. Los resultados indican que el uso de refuerzos longitudinales en cilindros deformados aumenta la resistencia al pandeo en porcentajes que varían de acuerdo con la sección transversal de los perfiles.

Descargas

Los datos de descargas todavía no están disponibles.

Referencias

[1] L. Friedrich, T.-A. Schmid-Fuertes, and K.-U. Schröder, “Comparison of theoretical approaches to account for geometrical imperfections of unstiffened isotropic thin walled cylindrical shell structures under axial compression,” Thin-Walled Struct., vol. 92, pp. 1–9, Jul. 2015, doi:10.1016/j.tws.2015.02.019.

[2] S. Timoshenko, Theory of elastic stability. New York: McGraw Hill, 1910.

[3] W. Koiter, “On the stability of elastic equilibrium,” University of Delf, 1945.

[4] B. Budiansky and J. W. Hutchinson, “Dynamic buckling of imperfection-sensitive structures,” in Applied Mechanics, Berlin, Heidelberg: Springer Berlin Heidelberg, 1966, pp. 636–651.

[5] J. M. T. Thompson and G. W. Hunt, A general theory of elastic stability. London: Wiley, 1973.

[6] A. B. Brush D, Buckling of Bars, Plates and Shells. New York: McGraw-Hill, 1975.

[7] J. Arbocz, “Post-buckling behaviour of structures numerical techniques for more complicated structures,” in Buckling and Post-Buckling, Berlin/Heidelberg: Springer-Verlag, 1987, pp. 83–142.

[8] X. Ding, R. Coleman, and J. M. Rotter, “Technique for Precise Measurement of Large-Scale Silos and Tanks,” J. Surv. Eng., vol. 122, no. 1, pp. 14–25, 1996, doi:10.1061/(asce)0733-9453(1996)122:1(14).

[9] M. Pircher and R. Bridge, “The influence of circumferential weld-induced imperfections on the buckling of silos and tanks,” J. Constr. Steel Res., vol. 57, no. 5, pp. 569–580, May 2001, doi:10.1016/S0143-974X(00)00027-4.

[10] F. Mahboubi Nasrekani and H. Eipakchi, “Axisymmetric Buckling of Cylindrical Shells with Nonuniform Thickness and Initial Imperfection,” Int. J. Steel Struct., pp. 1–11, Aug. 2018, doi:10.1007/s13296-018-0132-9.

[11] J. C. Amazigo, “Buckling of Stochastically Imperfect Structures,” in Buckling of Structures, Berlin, Heidelberg: Springer Berlin Heidelberg, 1976, pp. 172–182.

[12] J. Arbocz, “The Imperfection Data Bank, a Mean to Obtain Realistic Buckling Loads,” in Buckling of Shells, Berlin, Heidelberg: Springer Berlin Heidelberg, 1982, pp. 535–567.
[13] M. K. Chryssanthopoulos, M. J. Baker, and P. J. Dowling, “Imperfection Modeling for Buckling Analysis of Stiffened Cylinders,” J. Struct. Eng., vol. 117, no. 7, pp. 1998–2017, 1991, doi:10.1061/(asce)0733-9445(1991)117:7(1998).

[14] L.-W. Chen and L.-Y. Chen, “Thermal postbuckling analysis of laminated composite plates by the finite element method,” Compos. Struct., vol. 12, no. 4, pp. 257–270, Jan. 1989, doi:10.1016/0263-8223(89)90075-5.

[15] C. A. Meyers and M. W. Hyer, “Thermal buckling and postbuckling of symmetrically laminated composite plates,” J. Therm. Stress., vol. 14, no. 4, pp. 519–540, Oct. 1991, doi:10.1080/01495739108927083.

[16] H.-S. Shen, “Thermal postbuckling analysis of imperfect stiffened laminated cylindrical shells,” Int. J. Non. Linear. Mech., vol. 32, no. 2, pp. 259–275, Mar. 1997, doi:10.1016/S0020-7462(96)00054-6.

[17] M. J. Lewandowski, M. Gajewski, and M. Gizejowski, “Numerical analysis of influence of intermediate stiffeners setting on the stability behaviour of thin-walled steel tank shell,” Thin-Walled Struct., vol. 90, pp. 119–127, May 2015, doi:10.1016/j.tws.2015.01.019.

[18] Q.-V. Vu, V.-H. Truong, G. Papazafeiropoulos, C. Graciano, and S.-E. Kim, “Bend-buckling strength of steel plates with multiple longitudinal stiffeners,” J. Constr. Steel Res., vol. 158, pp. 41–52, Jul. 2019, doi:10.1016/j.jcsr.2019.03.006.

[19] J. D. Argüello-Bastos, C. A. Ruiz-Florián, O. A. González-Estrada, A. D. Pertuz-Comas, and A. Martínez-Amariz, “Compression tests performed in reinforced rigid matrix composite varying the reinforcement material,” J. Phys. Conf. Ser., vol. 1126, p. 012007, Nov. 2018, doi:10.1088/1742-6596/1126/1/012007.

[20] J. Martínez, E. Casanova, C. Graciano, and O. A. González-Estrada, “Sensitivity analysis of a member under compression via Monte Carlo method,” Rev. UIS Ing., vol. 17, no. 2, pp. 179–184, 2018.

[21] A. Ayestarán, C. Graciano, and O. A. González-Estrada, “Resistencia de vigas esbeltas de acero inoxidable bajo cargas concentradas mediante análisis por elementos finitos,” Rev. UIS Ing., vol. 16, no. 2, pp. 61–70, Sep. 2017, doi:10.18273/revuin.v16n2-2017006.

[22] ABAQUS, ABAQUS/standard user’s manual, v.6.9. Pawtucket, Rhode Island: Hibbitt, Karlsson & Sorensen, Inc., 2009.

[23] S.-E. Kim and C.-S. Kim, “Buckling strength of the cylindrical shell and tank subjected to axially compressive loads,” Thin-Walled Struct., vol. 40, no. 4, pp. 329–353, Apr. 2002, doi:10.1016/S0263-8231(01)00066-0.

[24] Y. Song, “Buckling of shells under non-uniform stress states,” Hong Kong Polytechnic University, 2002.

[25] C. Y. Song, J. G. Teng, and J. M. Rotter, “Imperfection sensitivity of thin elastic cylindrical shells subject to partial axial compression,” Int. J. Solids Struct., vol. 41, no. 24–25, pp. 7155–7180, Dec. 2004, doi:10.1016/j.ijsolstr.2004.05.040.

[26] ASME BPVC.II.D, Materials, Part D, Properties. New York: ASME, 2015.

[27] W. Ramberg and W. Osgood, “Determination of stress-strain curves by three parameters. Technical Note No 503,” 1941.

[28] E. Mirambell and E. Real, “On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation,” J. Constr. Steel Res., vol. 54, no. 1, pp. 109–133, Apr. 2000, doi:10.1016/S0143-974X(99)00051-6.

[29] K. Abdella, “Inversion of a full-range stress–strain relation for stainless steel alloys,” Int. J. Non. Linear. Mech., vol. 41, no. 3, pp. 456–463, Apr. 2006, doi:10.1016/j.ijnonlinmec.2005.10.002.

[30] E. Riks, “An incremental approach to the solution of snapping and buckling problems,” Int. J. Solids Struct., vol. 15, no. 7, pp. 529–551, 1979, doi:10.1016/0020-7683(79)90081-7.